====== Intro to Marty Behavior ======

===== Buttons and LEDs =====

{{ :martyv2:userguides:marty_s_led_buttons.png?1920 }}

{{ :martyv2:userguides:led_meanings.jpg?600 }}

===== How to turn Marty on/off =====

| {{ :martyv2:turn-on.gif?nolink }} | {{ :martyv2:turn-off.gif?nolink }} |

**Turn Marty ON:** a short press on the "Power Button" will turn your Marty on.

**Turn Marty OFF:** Hold the "Power Button" until the "Power LED" begins to flash, then stop holding the "Power Button" to complete the power down progress.

===== Unplugged Mode =====

| {{:martyv2:activate-screen-free-coding.gif?nolink }} | {{ :martyv2:screen-free-coding.gif?nolink}} |

**Activate Unplugged Mode:** a single press on the "A Button" will activate Marty's Unplugged coding  function, you will hear "unplugged". Marty will begin searching for the screen free coloured cards immediately after activation using his Foot mounted colour sensor.

**Turn Unplugged Mode OFF:** a single press on the "A Button" will deactivate the Unplugged coding, you will hear a bell whistle noise.

===== Renaming your Marty =====

If you wish to rename your Marty, you can do this from within the Marty the Robot App in the Configure page.

===== Updating your Marty's Calibration =====

If your Marty is walking funny, or his arms are all mixed up, then you can recalibrate your robot by following the below process within the Marty the Robot App.

{{ :martyv2:update_calibration_full_1_.mp4?700x700 }}