https://userguides.robotical.io/ 2026-05-02T16:11:54+00:00 https://userguides.robotical.io/ https://userguides.robotical.io/_media/logo.svg text/html 2024-09-11T14:52:52+00:00 Anonymous (anonymous@undisclosed.example.com) https://userguides.robotical.io/martyv1/getting_started/wifi-setup/command-hub-wifi?rev=1726066372&do=diff Robotical Command Hub Plus The “Robotical Command Hub Plus” produces a WiFi hotspot which is used to host communication between Marty the Robot and your chosen Marty programming device, be that a tablet, laptop or other. It allows you to set-up Marty, use our Marty Remote Control & run Scratch without needing an internet connection. WiFi network name (SSID):Password:it is still very much in development and will be rough around the edgesnotImportant - enable Flash and pop-ups. To run Scratch, … text/html 2024-09-11T16:11:53+00:00 Anonymous (anonymous@undisclosed.example.com) https://userguides.robotical.io/martyv1/getting_started/wifi-setup/connect-marty-to-a-wifi-network?rev=1726071113&do=diff This is the most common way to communicate with your Marty, and it's what we recommend our users do if you don't have a command hub This is a one time set up process, where you tell Marty your WiFi network details, and then every time you turn Marty on it will connect to that network.http://192.164.4.1Turn Marty off and on again after saving WiFi infoAngry IP ScanneThere are some instructions to get you started here text/html 2024-09-11T14:47:36+00:00 Anonymous (anonymous@undisclosed.example.com) https://userguides.robotical.io/martyv1/getting_started/wifi-setup/start?rev=1726066056&do=diff Marty V1 is controlled and programmed over WiFi. You can connect Marty to your WiFi network, or if you have a class pack it's easier to use the command hub School WiFi networks can be complicated to connect to. So, every Marty class pack comes with a little WiFi router that also runs Scratch without needing an external internet connection. We call it a command hubCommand Hub WiFConnect Marty To Your WiFi Network