If you have any questions, please don't hesitate to get in touch by e-mailing support@robotical.io
If you have any questions, please don't hesitate to get in touch by e-mailing ...
The following web based tools are available for working with Marty V1: ...
You can Calibrate Marty using our App, which is available for Android on the Google Play Store and for...
We're continually working on making the Marty scanning tools more robust, but while we're doing that...
Scratch is a beginner-friendly block-based programming language developed by MIT. You can use it to program...
TheMarty Setup WiFi Network lets you configure and calibrate Marty the first time you use the Robot....
For managed LAN/WANs and more complex network setups The WiFi module on Marty's Rick control board is...
You can find the IP address of Marty once he's connected to your network via our app. Just tapScan for...
Marty's WiFi interface needs a couple of ports...
If your command hub is not working any more due to a bad WiFi or network configuration change, you can...
The version number and date code is printed on the boards just below the word “Rick”, as highlighted...
The Command Hub Plus is a small WiFi router than runs the OpenWRT software. We customise it so that it...
Marty’s control board utilises an ESP8266 WiFi module - specifically the ESP-12E. WiFi type: 802.11...
