Build Guide

These articles are for Marty the Robot version 1

If you've received your Marty after 2020 it's likely you have a version 2!

Before You Begin

For the smoothest, easiest build, we’d recommend using this online Build Guide alongside the printed...

1 - Legs

Let's start with putting together Marty's Legs... [Servo Mount] [Hip/Knee Servo] [Servo Horn Screw]...

2 - Arms

[Arm/Eye Servo] [Side Panel] [M2 Nut] [M2x10mm Bolt] Attach a white Arm/Eye Servo to each Side Panel...

3 - Head

[ Base] x1 [Power Cable] x1 Take the Base and the Power Cable. Poke the wires and the retaining nut...

4 - Putting It Together

Firstly, check that you've got all the right bits for your Robot built — Two legs, both halves of the...

5 - Connecting Electronics

[Sticker Sheet] x1 [Step 19 Assembly] x1 Now you've connected both legs, carefully slot the bottom...

6 - Next Steps

[M2.5 Nut] x2 [M2.5x8mm Bolt] x2 With all your electronics connected, swing the face over (making sure...